Configure the following capture parameters and execute a capture.
Configure IQ Capture
IQ Bit
This sets the grid resolution for the display. Select the desired value from the pull-down list. The higher the number, the more positions the sample data (dots) can be in.
IQ Bandwidth
IQ Bandwidth is the rate of data to be collected for the duration of the IQ length. Select the desired value from the pull-down list.
IQ Length
This is the duration of the waveform capture. The GUI and data window can only display 1000 samples or data points. To view the additional data samples, click on the Download full IQ data in CSV format link to save the file. The maximum allowable capture period is 10 seconds.
IQ Capture
Start Capture
Press this button to execute a capture.
Note
Confirm that the SCPI port is not in use. The SCPI port is used during IQ Capture because of the large amount of data being collected. A red notice will appear if the data capture is interrupted. “Resource unavailable. Is somebody using the SCPI Port?”
Download full IQ data in CSV format
Click this link to download all of the captured data into a CSV format file. The file is titled traceIqData.csv and saved to the Download folder.